Deluxe Enhanced Extractor/Ejector Kit
Note #1: This kit does not include the Ejector Retaining Pin. You can re-use the retaining pin from your original bolt head or add the SS-2408 to this kit.
Note #2: This kit is identical to the SS-2401 Extractor Kit.
Note #3: The Extractor and Ejector in this kit may be slightly different from the Savage factory original. This is by design. Don't expect them to look exactly the same.
Fits ALL SAVAGE CENTERFIRE rifles.
Including models 10, 11, 12, 14, 16, 110, 111, 112, 114 & 116.
Also the Edge, Axis and Stevens 200
Includes:
Improved Extractor
Larger Extractor Detent Ball
Ejector Spring
Improved Ejector
Extractor Spring
If your Savage rifle has trouble extracting or ejecting spent cases, our Improved Extractor Kit may provide a solution. Our kit consists of a modified extractor, extractor spring, larger extractor detent ball, and custom ejector and ejector spring.
Related Products
Reviews
-
Don't Hesitate!
I was having major issues with my Savage 12 in .223 extracting shells...it also seemed to be ruining the accuracy. Once this was installed, no more ejection issues and accuracy is back down to sub 1" groups. If you are having these issues, don't hesitate and get this kit! It isn't technically difficult to install but I do have one word of caution...be very careful installing the spring and ball...you will probably send it flying at least once unless you are very careful. Go online and look at a video so you can get some tips.
-
Enhanced ejector / extractor kit
Savage Elite Precision in 6.5 creedmoor with ejection problem. This kit is awesome, shell casings are now ejected with authority. Best kit for a Savage bolt with ejection problems.
-
Savage model 11
I used my model 11 in .223 ALOT. The springs were worn down and I had been having ejection issues for quite a while. I replaced the parts in this kit with what was in the original bolt and it made a world of difference. Not only that, when taking the original parts out and comparing them to the replacement parts in this kit you can tell they are more robust. After installing even the noise of the parts working and the feel of the bolt ejecting the spent case seemed more solid. Savage was going to charge me the same price for the OEM parts when you can buy better ones here. I also had a mix-up with ordering that was completely my fault and Kinney's corrected the issue in about 30 minutes of me emailing them and fixed it at not cost to me. 100% recommend.
-
Deluxe extractor and ejector kit
Simply the best upgrade for hard use.
-
SS-2402
Works as advertised would highly recommend it to anyone who has been experiencing issues
-
Sav 10/12/110 extractor and injector upgrade
I have a Model 12 LR that has never done better than pulling cases back from the chamber and dropping them on the magazine follower. Easy to install kit now has easier extraction and kicks cartridges well clear of action. Good job on this upgrade kit.
-
Savage axis ejector and ejector kit
Preformed better then advertised. Little tough to close the bolt for the first few rounds, so expect a brake in time.
-
Savage deluxe extractor kit
It just works. It’s the best I have tried